QPJ747X, QPJ647X series hydraulic and pneumatic balance angle three-way mud valve

use

 

This product is mainly used in various types of water tanks of the water company. It can also be used to remove sediment or sewage from the bottom of the pool. It can also be installed in industrial pipelines such as water, gas and oil for interception.

 

Working principle and performance characteristics

 

This product consists of two parts: hydraulic cylinder and balance angle three-way stop valve. The hydraulic cylinder is powered and drives the valve plate to lift and lower, so that the valve body passage is opened or closed to achieve fluid continuity. The biggest feature of this product is the same. The installation of one product in the middle of the two horizontal pools can make the two sides of the pool drain at the same time, saving investment and other characteristics.

 

The hydraulic cylinder piston seal is made of V-shaped rubber, which has good sealing performance and durability. Its life span is more than five years, and the feedback information after the user has been used for up to seven years has not been replaced. The valve plate is soft sealed. After sealing, the sealing performance is good, and there is no leakage for maintenance and replacement. If equipped with electromagnetic reversing valve and accused hydraulic cylinder, it can realize remote control and automatic control, and can also be equipped with electric power. If equipped with a manual device, it can be installed in 2-12 rows, and the control can be turned off or off. The opening speed is fast, the driving pressure is low, the pressure source is taken from the pressure of the water plant itself, no additional equipment is needed, manpower and material resources are saved, and energy is saved.

 

Technical Parameters

 

1. Hydraulic cylinder drive medium: water, gas, oil (specify when ordering)

 

2. Hydraulic cylinder driving pressure: 0.15-0.3, 0.3-1.1MPa

 

3. Hydraulic cylinder drive medium temperature: normal temperature

 

4. Valve body nominal pressure; 1.0MPa

 

5. Body material: HT200, QT400-15

 

6. Flange connection standard: GB/T17241.6-98

 

7. Pressure test standard: GB/T13927-92

 

Note: If information is provided with feedback (also negotiated)

 

Hydraulic and pneumatic balance angle three-way mud valve profile flange connection size table